Volvo RWD 140-160 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2011 140-160 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Re: problem with the brakes... 140-160 1972

posted by  someone claiming to be Kermit on  Mon Oct 8 10:36 CST 2001 [RELATED]

Dang, nice reply!

Check the check valve right after you check the vacuum hose. You should be able to suck thru the hose connection end but not the end that enters the cylinder. No cheating!

Home mechs can really screw-up the brake bleeding on that system. I would have the entire system flushed out.

Those two things, and as Jones suggested, a really good cleaning of the pads and calipers (spring for a can of brake cleaner) and then see what you have. I believe in doing the easy (and cheap) things first.





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New problem with the brakes... [140-160][1972]
posted by  someone claiming to be devilmountain  on Mon Oct 8 03:44 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.