Volvo RWD 120-130 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2003 120-130 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Re: Bellhousing plate function? 120-130 1965

posted by  someone claiming to be Pete Fluitman on  Mon Oct 15 23:41 CST 2001 [RELATED]

It'll be fime. There were two versions. The early one, for which you have the bell housing used two 1/4" bolts to hold a pressed metal plate to the bell housing.

The later version used the alloy casting bolted to the block and had larger bolt holes in the bell housing.

f you want to fit the thing properly you need the appropriate bell housing but there are any number of cars running about assembled as you describe.

Regards





THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Bellhousing plate function? [120-130][1965]
posted by  someone claiming to be Mario Espinoza  on Mon Oct 15 19:37 CST 2001 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.