Volvo RWD 700 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 7/2002 700 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

T belt misaligned, other woes 700 1986

Bruce
Plug wire location on this engine agree with what you have indicated.

Will try again to seat and tighten the tensioner this afternoon, as that is the area that I suspect is the problem, despite having removed and reinstalled it two or three times already.

Still trying to figure out where the crank marks are supposed to be. To my thinking, so long as the cam TDC mark and the crank TDC mark are in line, and number one piston has been ascertained to be at the top of its stroke, everything should be just Jake. Is that correct? I am not using the white marks on the belt through frustration with the crank pulley and guard installation/interference.
JD






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New T belt misaligned, other woes [700][1986]
posted by  jaydee subscriber  on Sat Jul 9 17:14 CST 2005 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.