Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 4/2003

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

You can't take an M46 out of an 81 240 DL without taking the engine out, can you?

posted by  122 and 940 and too many on  Sun Mar 10 14:06 CST 2002
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Mon Apr 25 13:12 CST 2011
[RELATED]

The pin held in by the grub screw attaches the gear lever to the gearbox shift mechanism. The actual gearlever is held into the arm on the gearbox by a circlip. You need to remove both the pin (from underneath) and the circlip (from inside the car) to pull the gear lever. Once you get practised at it you can have the box sitting on the workbench in less than an hour.


Regards

Pete






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New You can't take an M46 out of an 81 240 DL without taking the engine out, can you?
posted by  someone claiming to be bob  on Sun Mar 10 09:16 CST 2002 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.