Volvo RWD Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 6/2004

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B230FT not starting.

I don't think there is any way to put the wrong gears on the cam and crank, so that should not be a problem. You do however need to make sure that the crank is positioned on the compression stroke when the timing belt is installed. This can be determined by rotating the crank while feeling for pressure at the #1 spark plug hole. Position the crank and then position the cam at the timing mark.

Dan






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New B230FT not starting.
posted by  C  on Mon Sep 22 13:09 CST 2003 >
  • New It runs!
    posted by  C  on Sun Oct 19 08:09 CST 2003 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.