Volvo RWD 444-544 Forum

INDEX FOR 1/2026(CURRENT) INDEX FOR 2/2013 444-544 INDEX

[<<]  [>>]


 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Locksmith woes 444-544

posted by  jj2126 on  Sat Apr 7 01:49 CST 2007
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 05:20 CST 2014
[RELATED]

Hi,
Sorry the locksmith could not imperssion the lock. It is true that you lubercate a lock to pick and do not lubercate to impression. However it is possible to impression anyway. Some times it will take several tries for a good locksmith.
If you decide to drill and please drill before you force it. Drill using a small drill 3/32 or a little bigger bit just above the top of the key. As you drill you will feel and hear the drill cutting the pins off so after five pins drilled tap the front a little then drill again as the top pins will fall down to where you drilled the frist time.Now turn with a big screwdriver. If it does not turn fairly easy drill again with a little bigger drill bit.To get the right depth to drill look at a key an stop drilling when you drill as deep as the key goes into the lock.
Joel the Locksmith






THREADED THREADED EXPANDED FLAT PRINT ALL
MESSAGES IN THIS THREAD

New Locksmith woes [444-544]
posted by  volvo65  on Fri Apr 6 12:14 CST 2007 >


<< < > >>



©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.